90-Tons Removed from Aeration Basin

90-Tons Removed from Aeration Basin

February 22, 2019
Share this article:

RAG & GRIT REMOVAL IN SOUTHEAST, FL

An aeration basin at a Southeast Florida Water Reclamation Facility was experiencing reduced capacity and due for maintenance.  Measuring 206-feet in length and divided into eight 24-foot by 24-foot cells, the cleaning of the tank was part of a rehabilitation plan to repair and replace key components of the structure.

Miramar 6 lores
AERATION BASIN FILLED WITH MATERIAL PRIOR
TO CLEANING.

U.S. Submergent Technologies’ (USST) Field Supervisor, Paul Del Favero, arrived with a team to the site prepared to perform rag and grit removal services.  In order to effectively remove the large quantities of sand, grit and rag material from the aeration basin, a drain down was necessary.  Once the tank was drained, the USST crew came in and vacuumed up the material and performed manual rag removal from the fine bubble diffusers.

“Our Combination truck sports a vacuum powered by a blower capable of delivering nearly double the CFM of a standard vacuum truck,” Denver Stutler, USST’s CEO, said, “allowing us to remove large amounts of dry material and complete the job quickly.  It’s not your typical vac truck.”

Square cement tank with most of the murky green liquid and materiel removed. Partial material remaining on bottom in and in-between fine bubble diffusers.
MIDWAY THROUGH CLEANING AERATION BASIN.

Applying their confined space entry training and expertise, the USST crew removed more than 90-tons of total material from the aeration basin and disposed of the material offsite.  Workers were then able to access, repair, and replace components on the bottom of the cleaned structure.

“I knew our reliable equipment and exceptional crew would be able to get the job done quickly and on schedule,” said Paul. 

Square cement tank empty of all material, with fine bubble diffusers visible on the bottom.
AERATION BASIN COMPLETELY CLEANED, ALL MATERIAL REMOVED.

Specializing in hard-to-reach environments in wet or dry conditions, USST can build a plan to safely and efficiently remove material from tanks, pipes, lift stations, and more.  Check out our video to learn more about the Combination technology and the GritGone Process® and give one of our representatives a call for a free site assessment at (844) 765-7866.


Share this article:
Image

Tags: 

More Recent Posts

Subscribe

Get news delivered straight to your inbox the day it gets published.

"*" indicates required fields

Name*
This field is for validation purposes and should be left unchanged.